How to calculate the pond liner size
To calculate the amount of liner you need for your koi pond, you need to know the measurements of the pond. Sketch out a plan of how you want the pond to look and calculate the width and length of your pond. Use average width and length if the pond is not square or oblong. The final measurement you will need is the maximum depth of your pond.
Liner length = max length + (2 x max depth) + 1 (for overlap)
Liner width = max width + (2 x max depth) + 1 (for overlap)
So for a pond of 5 by 4 metres, 1 metre deep: –
Pond liner length = 5+2+1 = 8 metres
Pond liner width = 4+2+1 = 7 metres
You’d need a pond liner that is 8 metres x 7 metres.
Incidentally, this pond would hold 20,000 litres (not including filter system)
Now you can go to the pond liner page and select the type of liner you would like.
Calculating Pond Capacity
It is important to calculate the correct pond capacity to enable the right level of filtration to be chosen for your pond and a to give a guide on a minimum flow rate to work in conjunction with any filter.
To do this, again measure the length, the width and the depth of your pond in feet. If your pond is not a regular shape you will need to work out the average of all sizes and use this to calculate the capacity.
Once you have all three dimensions you need to multiply these all together, and then multiply this calculation by 6.25.
e.g. a pond that is 10 ft long and 5ft wide and 4ft deep would use the calculation:
10 x 5 x 4 = 200
200 x 6.25 = 1250 gallons
Remember this is only an approximate guide.
If you require this capacity in litres which most companies now work with you will need to multiply the number of gallons by 4.5
e.g. calculate the number of litres by knowing the pond is 1250 gallons:
1250 x 4.5 = 5,625 litres
Again this will give you an approximate guide.
You can reverse this calculation to find the number of gallons from a known number of litres.
e.g. calculate the number of gallons by knowing the pond is 1250 litres:
1250 / 4.5 = 1250 gallons.
Weight of Water
Just remember: –
- A pint of water weighs a pound and a quarter
- A gallon weighs ten pounds.
This table will help you with converting units from one type to another (for example 1 Imperial Gallon/min = 0.16 Cu. Feet/min, 4.55 Litres/min or 0.005 Cu. Metres/min) …
|Unit||Imp Galls/min||Cu Feet/min||Litres/min||Cu. M/min|
Gallons to Litres and much more…..
To convert gallons to litres multiply by 4.546
To convert gallons to US gallons multiply by 1.2
To convert US gallons to litres multiply by 3.78
To convert cu.feet to gallons multiply by 6.23
To convert cu.feet to US gallons multiply by 7.48
To convert inches to cm multiply by 2.54
To convert feet to metres multiply by 0.305
To convert pounds to kilograms multiply by 2.2
To convert sq. feet to sq. metres multiply by 0.093
Of course to convert in the other direction you divide by the factor.
For example to convert litres to gallons you would divide by 4.54